TANNOY VS10 BP ลำโพง Passive Subwoofers
The Tannoy VS 10BP is a compact, versatile bandpass subwoofer system, designed to extend the low frequency response of Tannoy V Series loudspeakers and increase system headroom.
Extending the frequency response of these systems to below 40Hz this highly efficient design is capable of providing output levels normally associated with considerably larger enclosures. A system suited to background music playback in applications ranging from clubs, bars and cafes, right through to theatres and AV presentations.
The VS 10BP utilizes a single high efficiency 250mm (10.00”) drive unit in a compact and sturdy, black or white painted MDF cabinet. The design concept also allows discreet placement, for instance unobtrusively incorporated into fixed furnishings such as underneath seating or the bar in cafes and bars.
The install placement is made even easier as the design incorporates moveable bass port tubes and blanking plates that can be swapped from the side to the end panel, allowing the unit to be installed in various orientations. M10 rigging points are also provided to allow permanent installation.
Fitted to the VS 10BP are two pairs of 4mm binding posts for the amplifier input and high-pass output connectors to the satellite loudspeakers, allowing the sub and satellites to be driven from a single amplifier channel. A digital speaker controller, such as the Tannoy TDX 1 or TDX 2, can be used to increase the versatility of the system and allow relative attenuation between the subwoofer and satellite loudspeakers. Use of such controller would also provide delay if required as well as driver protection and optimal integration.
Specifications
- System Type Subwoofer-Bandpass
- Frequency Response (-3dB) (1) 39Hz - 110Hz
- Frequency Response (-10dB) (1) 35Hz - 130Hz
- System Sensitivity (1W @1m) (2) 95dB (1W = 2.83V for 8 Ohms)
- Power Handling Average (1): 200 watt program: 400 watt Peak (10ms): 800 watt
- Recommended Amplifier Power 200 - 400 Watt / 8 Ohms
- Rated Maximum SPL (2) Average: 118dB Peak: 124dB
- Nominal Impedance 8 Ohms
- Driver Complement 250mm (10.00”) High excursion bass driver
- Recommended Crossover 80Hz - 110Hz, 24dB/octave
- Recommended High-pass filter-35Hz, 24dB/octave
- Internal passive crossover @ 110 Hz
- Distortion 10% Full Power (12.65V) 2nd Harmonic 40Hz: 2.27% 100kHz: 1.79%3rd Harmonic 40Hz: 0.73% 100kHz: 1.27% 1% Full Power (4.0V) 2nd Harmonic 40Hz: 0.58%100kHz: 0.61% 3rd Harmonic 40Hz: 0.48% 100kHz: 1.37%
Construction
- Enclosure: 50 liter (1.56 cu ft) Bandpass 15mm (0.62”) MDF internally braced
- Finish: Textured black or white paint with custom colors on request
- Connectors: 2 x Pair 4mm
- Binding Posts: (Input & passive high pass output)
- Fittings: 2 x Port aperture blanking plates to allow the bass ports to be moved to another fascia 8 x M10 flying inserts. Blanking plate for optional VTH pole mount
- Dimensions: (HxWxD) 355mm x 385mm x 590mm (13.98“ x 14.37” x 23.23”)
- Weight: 17.50 Kg (38.50 lbs)