PERFORMANCE |
|
Frequency Response (-3 dB) (1)
Full Range Mode |
70 Hz – 25 kHz |
Frequency Range (-10 dB) (1)
Full Range Mode |
60 Hz - 30 kHz |
Frequency Response (-3 dB) (1)
Hi-Pass mode |
100 Hz – 25 kHz |
Frequency Range (-10 dB) (1)
Hi-Pass mode |
80 Hz – 30 kHz |
Dispersion (-6dB) |
75 degrees (H) x 40 degrees (V)
|
Driver Complement |
1 x 305 mm (12.00”) PowerDual™ with Q-Centric waveguide |
Crossover |
Passive 1.5 kHz |
Directivity Factor (Q) |
13.0 (averaged 1 kHz to 8 kHz) |
Directivity Index (DI) |
11.1 (averaged 1 kHz to 8 kHz) |
Rated Maximum SPL (2) |
Average: 123 dB
Peak: 129 dB |
Distortion
10% Full Power (16.7 V)
250 Hz
1 kHz
10 kHz
|
2nd Harmonic 3rd Harmonic
0.72% 0.17%
0.57% 0.76%
5.11% 0.41% |
Distortion
1% Full Power (5.30 V)
250 Hz
1 kHz
10 kHz
|
2nd Harmonic 3rd Harmonic
0.16% 0.19%
0.18% 0.49%
1.63% 0.08% |
CONSTRUCTION |
|
Enclosure |
36.4 litre, 15 mm (enclosure) and 18 mm (front) birch plywood, vented and internally braced. |
Finish |
Textured black or white paint, with custom colours on request.
Powder coated perforated steel grille, Airnet cloth behind |
Connectors
|
1 x female XLR (input), 1 male XLR (link), 1 x Neutrik Powercon |
Controls & Indicators
|
Level Control
Power LED (Blue)
Signal LED (Green)
Limit/Protect LED (Red)
Full Range / HighPass Switch (110Hz)
Power Mode Switch
Power Switch |
Fittings |
8 x M10 Flying inserts (portrait or landscape mounting), 8 x M10 yoke bracket inserts
1 x Integrip carrying handle
Blanking plate for optional VTH pole mount |
Dimensions (H x W x D) |
486 x 370 x 360 mm (HxWxD)
(19.1 x 14.6 x 14.1” ) |
Net Weight |
23.0 kg (50.7 lbs) |
Shipped Weight |
25.0 kg (55.1 lbs) |
Packed Quantity |
1 |
ELECTRONICS |
|
Maximum signal input for clip |
'Input attenuator at Maximum: 4.5 dBu
(Hard clip will occur at 14.5 dBu input signal) |
Dynamic Range |
'106 dB |
Efficiency |
>90% |
Damping Factor |
>400 ref 8 ohm at 1 kHz |
Distortion |
<0.05% @ 1 kHz -3 dB output (22 kHz bandwidth) |
Input Impedance |
10 kohm unbalanced, 20kohm balanced |
Protection systems
Over Current
Clip limiter
Temperature
Brownout
Mains
Indicators
|
Output current limiter, always active
Output voltage clip limiter, always active
Over temperature causes protective mute
Automatic protection & recovery
Inrush current limiter
1x Power LED, 1x signal LED, 1x Limit LED
(Power LED: Red = StandBy, Green = On, Yellow = Temperature protection active) |
Amplifier Type |
Inherently bridged, globally modulated, high performance single channel class D. |
PSU SPECIFICATIONS |
|
Input Connector |
Locking Neutrik Powercon |
Voltage Selection |
Universal mains input |
Type |
High efficiency, regulated switch mode power supply |
Efficiency |
>85% typical |
Input voltage |
100Vac-240Vac /- 10%, 50-60 Hz /-10% |
Mains fuse |
Internal |
Fuse type |
3,15AT |
Other features |
Inrush current limiter |
|
|
StandBy power consumtion |
<1 W |
Idle power consumption |
<15 W |
Maximum power consumtion |
300 W |