Turbosound TFA118L ตู้ลำโพง 18" Horn Loaded Subwoofer for Touring Applications. Can be flown or ground stacked.
The TURBOSOUND FLEX ARRAY TFA118L is a compact 3,200 Watt horn loaded bass enclosure designed to be flown with FLEX ARRAY mid/highs in a wide variety of concert touring applications. It consists of a carbon fibre loaded 18" low frequency driver with inside/outside wound coil, utilising a specialised voice coil wound on both the inside and the outside of the coil former for higher magnetic density, which results in better cooling, higher power handling, and improved efficiency, in a low distortion horn design. This is the same drive unit as used in the larger double 18" TCZ218B, and employs the same loading techniques so these two bass enclosures can freely be mixed in any application.
The enclosure is equipped with an integrated flying system which enables it to be flown at the top of a column of FLEX ARRAY loudspeakers using a simple conversion frame between the bass enclosures and mid/highs.The same conversion frame is also used to provide a stable FLEX ARRAY ground stack. A 20 mm threaded pole mount socket is fitted for use with flying yokes.
The 15mm (5/8") birch plywood cabinet is equipped with recessed handles on the sides and back, and is supplied with heavy duty wheels in order to aid trucking and handling. It is finished in hard wearing semi matt black paint. A recessed panel at the rear of the cabinet carries two parallel linked Neutrik speakON* NL4 connectors for input and link through connections.
Feature.
- Horn loaded subwoofer for touring applications
- 800 Watts continuous, 3,200 Watts peak power
- Carbon fibre loaded 18" low frequency driver with inside/outside wound coil
- Integral rigging system for flying and ground stacking
- Low distortion horn design for maximum sound pressure level
- 15 mm (5/8”) birch plywood enclosure with hard wearing semi matt black paint finish
- Rugged powder coated perforated steel mesh grille
- 20 mm threaded pole mount to support satellite speaker
- Neutrik speakON* NL4 connectors for reliable long life operation
- 3-Year Warranty Program**
- Designed and engineered in England
Specs.
Dimensions (H x W x D) |
574 x 710 x 848 mm (22.6 x 28 x 33.4") |
Net Weight |
72.5 kg (159.5 lbs) |
Components |
1 x custom 18” (457 mm) LF driver |
Frequency Response |
38 Hz - 150 Hz ±3 dB, 30 Hz - 150 Hz ±10 dB |
Sensitivity (1 W @ 1 M) |
104 dB; 110 dB with 16 units |
Power Handling |
800 Watts continuous, 3200 Watts peak |
Calculated Max SPL |
Single enclosure: 133 dB continuous (calculated SPL addition), 139dB peak |
Nominal Impedance |
8 Ohms |
Construction |
15 mm (5/8”) birch plywood throughout; heavily braced, rebated, screwed and glued. Finished in black semi matt textured paint. Eight recessed carrying handles. |
Grille |
2 mm powder coated perforated mild steel backed with reticulated foam |
Connectors |
2 x Neutrik speakON* NL4, wired pin1+: positive, pin1-: negative; pin2+ and pin2-: n/c |
Protection |
|
Rigging |
Integrated flyware |