Turbosound TAS-153 ตู้ลำโพง 15" Bi-Amped or Tri-Amped Three‐Way Mid-‐High Loudspeaker 50°x25° dispersion
Arrayable 3 Way 15" Full Range Loudspeaker With Polyhorns for Installation Applications
The TURBOSOUND ASPECT TAS153 is an arrayable trapezoidal switchable bi-amp/tri-amp three way full range loudspeaker for designed for a wide range of fixed installations.
It consists of a carbon fibre loaded 15" low frequency driver with inside/outside wound coil, a custom high efficiency neodymium motor 10" drive unit on a Polyhorn device optimised for mid frequencies, and an aluminium dome 1" neodymium motor high frequency compression driver loaded by a high frequency Polyhorn device. Both low distortion Polyhorn designs feature a sharp cut-off at the edges of the 50° horizontal by 25° vertical coverage pattern, which all but eliminates the comb filtering effects commonly experienced between adjacent sources when arraying conventional horn designs.
The TAS153 includes a passive crossover network between the MF and HF drive units for bi-amped operation which can be bypassed for full tri-amped operation by moving an internal jumper.
The 15 mm (5/8") birch plywood cabinet with is trapezoidally shaped with side angles optimised for close packing, and is finished in hard wearing semi matt black paint with an architecturally styled powder coated perforated steel mesh grille. An optional removable, stackable wheelboard clips on to the front of the cabinet for transportation.
M10 rigging points are provided on the top, bottom and sides of the cabinet for suspension in any orientation, and two further rigging points are provided on the rear for pull back. A cost-effective external flying system consists of internal steel struts which are used in conjunction with lifting bars, hinge kits and rear straps to assemble simple two-wide and three-wide arrays of cabinets. A recessed panel at the rear of the cabinet carries two parallel-linked Neutrik speakON* NL8s for input and link through connections, with a further Neutrik speakON* NL4 which is used for the sub link-out connection.
Feature.
- Arrayable 3 way full range loudspeaker for installation applications
- 650 Watts continuous, 2,600 Watts peak power
- Carbon fibre loaded 15" low frequency driver with inside/outside wound coil
- High efficiency 10" neodymium motor mid range compression driver
- Aluminium dome 1" neodymium motor compression driver
- Low distortion Polyhorns provide 50° H x 25° V dispersion
- Multiple array configurations for extended coverage
- Switchable bi-amp/tri-amp operation for flexibility of use
- Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
- Multiple internal rigging points allow suspension in any orientation
- 15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
- Architecturally styled powder coated perforated steel mesh grille
- Neutrik speakON* NL4 and barrier strip connectors
- 3-Year Warranty Program**
- Designed and engineered in England
Specs.
| Dimensions (H x W x D) |
977 x 574 x 498 mm (38.5 x 22.6 x 19.6") |
| Net Weight |
56 kg (123.2 lbs) |
| Components |
1 x custom 15" (381 mm) LF driver, 1 x custom 10" (254 mm) MF driver on a midrange Polyhorn, 1 x custom HF driver on a high frequency Polyhorn |
| Frequency Response |
60 Hz - 20 kHz ±4 dB (with DSP) |
| Dispersion |
50° H x 25° V; horizontal array angle: 45° |
| Sensitivity (1 W @ 1 M) |
LF: 106 dB; MF: 105 dB; HF: 112 dB |
| Power Handling |
LF: 400 Watts continuous, 1600 Watts peak; MF: 200 Watts continuous, 800 Watts peak; HF: 50 Watts continuous, 200 Watts peak |
| Calculated Max SPL |
135 dB continuous, 141 dB peak |
| Nominal Impedance |
LF: 8 Ohms, MF: 16 Ohms, HF: 16 Ohms |
| Crossover |
Passive: 250 Hz, Active: 250 Hz, 4k/5k99 Hz |
| Construction |
15 mm (5/8") and 18 mm (3/4") birch plywood throughout; rebated, screwed and glued. Finished in black semi matt textured paint. Two recessed carrying handles and two additional grab positions. |
| Grille |
Cloth / expanded metal |
| Connectors |
2 x Neutrik speakON* NL8 wired: pin1+ and 1- link to NL4; pin 2+: LF positive; pin2-: LF negative; pin 3+: MF positive, pin 3-: MF negative, pin 4+: HF positive, pin 4- HF negative;
1 x Neutrik speakON* NL4 wired: pin1+: sub positive, pin1-: sub negative |
Protection
|
