Turbosound TVX122M ตู้ลำโพง 2 Way 12" Full Range Loudspeaker and Stage Monitor for Portable PA and Installation Applications 70°x70° dispersion
2 Way 12" Full Range Loudspeaker and Stage Monitor for Portable PA and Installation Applications
The TURBOSOUND VENUE TVX122M is a two way passive 2,400 Watt full range portable loudspeaker for use in FOH and stage monitor applications, and also for a wide variety of fixed installations. It consist of a carbon fibre loaded 12" low frequency driver with inside/outside wound coil and an aluminium dome 1" neodymium motor high frequency compression driver on a 70° horizontal by 70° vertical dispersion low distortion waveguide.
A dual angle pole mount socket is provided, allowing the loudspeaker to be used straight on or raised higher and angled downwards to optimise audience coverage, while in floor monitor orientation the TVX122M presents a low profile to maximise audience sightlines.
The 15 mm (5/8") birch plywood enclosure is fitted with a rugged powder coated perforated steel mesh grille, and steel handles for easy lifting and carrying, and is finished in hard wearing semi matt black paint. Multiple internal threaded rigging points are provided to allow use with TURBOSOUND wall and ceiling brackets, and OmniMount* brackets, or for suspension with eyebolts in any orientation. Two Neutrik speakON* NL4 connectors are provided on the rear panel for input and link through connections to additional enclosures.
Feature.
- 2 way full range loudspeaker and stage monitor for portable PA and installation applications
- 600 Watts continuous, 2,400 Watts peak power
- Carbon fibre loaded 12" low frequency driver with inside/outside wound coil
- Aluminium dome 1" neodymium motor compression driver
- Low profile design to maximise audience sight lines
- Low distortion waveguide provides 70° H x 70° V dispersion
- 15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
- Rugged powder coated perforated steel mesh grille
- Dual angle pole mount for accurate audience coverage
- Steel handles for easy lifting and carrying
- Multiple internal rigging points for installation applications
- Neutrik speakON* NL4 connectors for reliable long life operation
- 3-Year Warranty Program**
- Designed and engineered in England
Specs.
| Dimensions (H x W x D) |
629 x 381 x 364 mm (24.8 x 15.0 x 14.3") |
| Net Weight |
21.2 kg (46.6 lbs) |
| Components |
1 x 12” (305 mm) LF Driver, 1 x 1” (25 mm) HF Compression Driver |
| Frequency Response |
85 Hz - 20 kHz ±3 dB, 55 Hz - 20 kHz ±10 dB |
| Dispersion |
70° H x 70° V @ -6 dB Points |
| Sensitivity (1 W @ 1 M) |
97 dB |
| Power Handling |
600 Watts Continuous, 2,400 Watts Peak |
| Calculated Max SPL |
125 dB Continuous, 131 dB Peak |
| Nominal Impedance |
8 Ohms |
| Construction |
15 mm (5/8") Birch Plywood Enclosure, Finished in Semi Matt Black Paint |
| Grille |
Powder Coated Perforated Steel |
| Connectors |
2 x Neutrik speakON* NL4, Wired Pin 1+: Positive, Pin 1- : Negative, Pins 2+ and 2- N/C |
| Protection |
