JTS SIEM-111R/IE-6 UHF PLL Body Pack Receiver with IE-6 Earphone
SIEM-111T UHF PLL Single Channel Transmitter
- The SIEM-111 System features reliable JTS UHF PLL technology.
- There are 961 selectable UHF channels available. As many as 16 sets of SIEM-111T transmitters can operate on the same stage.
- The system offers 4 groups, with each group having 16 compatible preset channels to choose from. This allows the monitor engineer to set up systems quickly and easily.
- MPX Stereo Audio Transmission / Reception, switchable to Mono operation if desired.
- All metal case construction on the SIEM 111R and SIEM 111T.
- The JTS advanced circuitry assures outstanding signal-to-noise ratio.
- IE-1 and IE-6 earphones seal off the ear canal with JTS designed Dyna-Driver ear buds which reduce undesired stage noise, ambient sound levels.
- 3 pairs of different sized Silicon sleeves included with the IE series earphones ensure a right fit for the users earcanal and comfort.
Specifications :
| Carrier Frequency Range |
502~960 MHz |
| RF Output Power |
10 mW |
Nominal Frequency Deviation
(modulation) |
±40KHz |
| Audio Input Impedance |
20kΩ |
| Nominal Input Level |
-10 dBV ; 0 dBV (ATT-10 dBV) |
| Maximal Input Level |
10 dBV ; 20 dBV (ATT-10 dBV) |
| LCD Display |
AF Level, Stereo/Mono, Attenuation Level, Group, Channel, Frequency |
| Audio Input Connector |
2 x Balanced XLR /Ø6.3mm phone Combo Socket |
| Audio Output Connector |
1 x 1/8” Stereo Phone Jack
1 x 1/4” Stereo Phone Jack |
| Loop Out Connector |
2 x Balanced Loop Out Socket |
| Switching Power Supply |
100-240V Switching power supply |
SIEM-111R UHF PLL Body-Pack Receiver
- The SIEM-111 System features reliable JTS UHF PLL technology.
- There are 961 selectable UHF channels available. As many as 16 sets of SIEM-111T transmitters can operate on the same stage.
- The system offers 4 groups, with each group having 16 compatible preset channels to choose from. This allows the monitor engineer to set up systems quickly and easily.
- MPX Stereo Audio Transmission / Reception, switchable to Mono operation if desired.
- All metal case construction on the SIEM 111R and SIEM 111T.
- The JTS advanced circuitry assures outstanding signal-to-noise ratio.
- IE-1 and IE-6 earphones seal off the ear canal with JTS designed Dyna-Driver ear buds which reduce undesired stage noise, ambient sound levels.
- 3 pairs of different sized Silicon sleeves included with the IE series earphones ensure a right fit for the users ear canal and comfort.
Specifications :
| Input Level Select Switch |
0dB / -10dB |
| Earphone Output. |
60 mW |
| Minimum Load Impedance |
16Ω |
| LCD Display |
RF Level, Lock-On, Battery Fuel Gauge, Stereo/Mono, HF booster,
Dynamic Limiter, Group, Channel, Mute, Frequency |
| Output Connector |
1/8” Stereo Phone Jack |
| Power Supply |
2 AA batteries |
| Operation Hour. |
Over 12 hours |
IE-6Dual Performance Drivers Monitoring Earphone
The IE-6 is designed with dual performance drivers and built-in crossover. It loyally reproduces precision highs, natural mids, and full bass. The excellent IE-6 is specially designed for JTS wireless in ear monitoring system. Yet the dynamic design makes itself also perfectly compatible with systems from other major brands.
High-dynamics, High-definition, Low-noise, distinct sound stage, transparent and airy highs, clear low-frequency, excellent isolation, as well as endurance for high sound pressure level, extreme durability and accurate audio reproduction.
Specifications :
| Driver |
Dual balanced armatures(Single Hi/Single Low)with a passive crossover |
| Frequency Response |
20~18000 Hz |
| Impedance |
22Ω |
| Sensitivity (at 1000Hz) |
120 dB/mW |
| Max. Input Power |
150mW |
| Distortion |
Less than 0.3% |
| Cord length |
140cm |
| Net Weight |
7 grams (excluding cable) |
| Output Connector |
Gold-plated Ø3.5mm phone, Stereo |
| Option. |
Dual Plug Airline adaptor, 1/4” Adaptor (6.3mm) |
| Standard |
Carrying Case |
| Accessories |
Cleaning Rod, Three pairs of Silicon Sleeves (small, medium, and large) |
|
