RODE Filmmaker Kit ชุดไมโครโฟนไร้สาย แบบพกพา สำหรับติดกล้อง Digital Wireless System for Filmmakers
ชุดไมโครโฟนไร้สาย แบบพกพา สำหรับติดกล้อง ประกอบด้วย
- RX-CAM เครื่องรับสัญญาณ (ติดกับกล้องถ่าย) Camera-Mounted Wireless Receiver
- TX-BELT เครื่องส่งสัญญาณ Wireless Transmitter
- Lavalier Lapel Microphone ไมโครโฟนแบบติดปกเสื้อ
- Captive TRS cable สายสัญญาณ สำหรับเครื่องรับสัญญาณสู่กล้องถ่าย
RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE’s omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.
Features
- Series II, 2.4GHz digital transmission
- 128-bit encryption
- Up to 100 metres range*
- OLED display (on receiver)
- One button pairing
- Three level gain control
- AA battery or USB powered
- Includes RØDE's broadcast Lavalier microphone
In the box
- Lavalier Lapel Microphone
- RX-CAM Camera-Mounted Wireless Receiver
- TX-BELT Beltpack Wireless Transmitter
- Captive TRS cable
Specifications
Transmission type |
2.4GHz Fixed Frequency Agile System |
System dynamic range |
112dB |
Range (distance) |
Up To 100m |
Frequency range |
35Hz - 22kHz |
Maximum output level |
1v Rms (2.8v P-p) |
Max input signal level |
1v Rms (2.8v P-p) |
Max latency |
4ms |
Receiver (RX-CAM)
Power source |
2 X AA Battery Or MicroUSB |
Antenna |
Internal |
Input connection |
3.5mm TRS Locking Jack Socket |
Input impedance |
10kΩ |
Dimensions |
111mm X 65mm X 40mm |
Weight |
190gm |
Transmitter (TX-BELT)
Power source |
2 X AA Battery Or MicroUSB |
Antenna |
Internal |
Input connection |
3.5mm TRS Locking Jack Socket |
Input impedance |
10kΩ |
Dimensions |
111mm X 65mm X 40mm |
Weight |
190gm |
Lavalier
Acoustic Principle |
Pressure Gradient |
Active Electronics |
JFET impedance converter |
Capsule |
0.10" |
Address Type |
End |
Frequency Range |
60Hz - 18kHz |
Output Impedance |
3000Ω |
Maximum SPL |
110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level |
189.0dBu (@ 1kHz, 1% THD into 1KΩ load |
Sensitivity |
-33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) |
25dB-A |
Weight |
1.00gm |
Dimensions |
12.00mmH x 4.50mmW x 4.50mmD |