Shure SLX14/WH20 TQG ไมโครโฟนไร้สายแบบครอบศรีษะ Headset Wireless System
SLX Wireless Guitar/Bass System. Includes SLX1 Bodypack Transmitter, SLX4 Diversity Receiver, and WA302 Instrument Cable. Links a bodypack transmitter to a guitar or bass.
Backlit LCD with timeout feature, Frequency and power lockout, and 3-segment battery fuel gauge.
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box. Model SLX4L available with logic output for use with software echo cancellation and remote battery life monitoring
SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
- Automatic Frequency Selection
- Automatic Transmitter Setup
- 960 Selectable frequencies across 24 MHz bandwidth
- Detachable 1/4 wave antennas
- Microprocessor-controlled diversity
- RF presence LED
- 5-segment audio meter
- Multi-function, backlit LCD
- Low battery indicator
- Frequency and power lockout
- Rugged metal chassis
- Volume control on rear of unit
- 1/2 rack design
- Furnished rack hardware
- Non-slip bumpers for use out of rack
- XLR and 1/4" outputs
The Shure WH20 is a rugged, lightweight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances. Suitable for any voice communications application where comfort and reliability are required.
The WH20 has a cardioid (unidirectional) pickup pattern. This provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources, such as air-conditioning, musical instruments and loudspeakers. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency rolloff to compensate for the proximity effect inherent in cardioid microphones during close-talk operation.
An integrated elastic headband secures the headset comfortably. The headband, wireframe, and gooseneck are adjustable to accommodate any head size or shape. WH20 is supplied with foam windscreen and clothing clip.
- WH20QTR - Includes a right-angle 1/4 inch phone plug for use with Shure Headset Wireless Microphone Systems, or any unbalanced microphone input.
- WH20TQG - Includes a a miniature four-pin female 4-pin mini connector for direct connection to Shure wireless body pack transmitters.
- WH20XLR (Wired) - Includes three-pin male XLR connector with a convenient detachable belt clip.
TypeDynamic, Close-Talking Frequency Response (at 8 mm)50 to 15,000 Hz Polar PatternCardioid (unidirectional) response -- uniform with frequency, symmetrical about axis ImpedanceMicrophone rating impedance is 150 ohms (200 ohms actual) Output Level (close talked (at 12.5 mm (1/2 inch)) at 1,000 Hz)Open Circuit Voltage: -67.0 db/Pa (0.45 mV)(1 Pa = 94 dB SPL) Hum Sensitivity38.4 dB equivalent SPL in a 1 millioersted field Polarity- WH20QTR as a wired microphone:
- Positive sound pressure on diaphragm produces positive voltage on tip with respect to sleeve (ground) of microphone output phone plug connector.
- WH20QTR, WH20TQG used with Shure Wireless Systems:
- 1/4-inch Phone Jack Receiver Outputs: Positive sound pressure on diaphragm produces positive voltage on tip of receiver output connector.
- 3-pin XLR Receiver Outputs: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of low-impedance output connector, and on tip of Aux output connector.
- WH20XLR as a wired microphone:
- Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of microphone output XLR connector.
-
Environmental ConditionsOperating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)Storage Temperatures: -29 to 74 degreesC (-20 to 165 degrees F)Humidity: 0 to 95% CableAttached 1.22 m (4 ft), small-diameter, shielded, PVC-jacketed, two-conductor. Cable ConnectorWH20QTR: Right-angle 1/4-inch phone plugWH20TQG: Female 4 pin mini connector (TA4F)WH20XLR: Three-pin XLR with detachable belt clip ConstructionBlack thermoplastic housing; stainless steel grille; black TEFLON®-coated stainless steel wireframe; flexible plastic-clad monel gooseneck; rubber/nylon elastic headband
WH20 Dynamic Headset Microphones
