| Power Source |
AC mains (supplied AC adapter must be used) |
| Power Consumption |
200 mA (12 V DC) |
| Receiving Frequency |
576 - 932 MHz (*2), UHF |
| Channel Selectable |
64 selectable frequencies |
| Receiving System |
Double super-heterodyne |
| Diversity System |
Space diversity |
| Mixing Output |
MIC/LINE (selectable): -60 dB (*1) (MIC)/-20 dB (*1) (LINE), 600 Ω
phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced) |
| Mixing Input |
-20 dB (*1), 10 kΩ, unbalanced, phone jack |
| Antenna Input |
75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) |
| Receiving Sensitivity |
90 dB or more, Signal to Noise ratio (20 dBμV input, 40 kHz deviation) |
| Squelch Sensitivity |
16 - 40 dBμV variable |
| Squelch System |
Using together of noise SQ, carrier SQ and tone SQ |
| Tone Frequency |
32.768 kHz |
| Indicator |
Audio (6 steps), RF (6 steps), ANT A/B, Audio (peak), Battery alarm |
| Channel Check |
Usable frequencies scanning |
| Signal to Noise Ratio |
110 dB or more (A-weight, unbalanced output) |
| Harmonic Distortion |
1 % or less (typical) |
| Frequency Response |
100 Hz - 15 kHz, ±3 dB |
| Operating Temperature |
-10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) |
| Operating Humidity |
30 % to 85 %RH (no condensation) |
| Finish |
Resin, black |
| Dimensions |
210 (W) × 44 (H) × 205.1 (D) mm (8.27" × 1.73" × 8.07") |
| Weight |
700 g (1.54 lb) |
| Accessory |
AC adapter (*3)…1, Whip antenna…2, Rubber foot…4 |
| Option |
Mounting bracket kit: MB-WT3 (for rack mounting one WT-5805 unit)
MB-WT4 (for rack mounting two WT-5805 units) |
