Turbosound TCS‐61 ตู้ลำโพง Arrayable 2 Way 6.5" Full Range Loudspeaker for Installation Applications 100°x60° dispersion
Arrayable 2 Way 6.5" Full Range Loudspeaker for Installation Applications
The TURBOSOUND ATHENS TCS62 is an arrayable passive 700 Watt two way full range loudspeaker designed for use in a wide range of fixed installations. It consists of a carbon fibre loaded 6.5" low frequency driver with low mass coil for improved transient response and an aluminium dome 1" neodymium motor high frequency compression driver on a rotatable 100° horizontal by 60° vertical Converging Elliptical Waveguide in an optimally tuned enclosure. These high grade components are matched with an internal passive crossover to ensure a seamless transition between the HF and LF drivers.
The cabinet is constructed from 12 mm (1/2”) birch plywood, with an architecturally styled powder coated perforated steel mesh grille backed with reticulated foam. Its trapezoidal shape allows it to be tight packed with other TCS series cabinets and enables visually unobtrusive loudspeaker arrays. Multiple rigging points, supported by internal steel flying strips, are provided on the top, bottom, sides and rear of the cabinet to allow the TCS62 to be suspended and angled in permanent installations using M8 shoulder eyebolts, and for use with TURBOSOUND and OmniMount* wall and ceiling brackets.
A Neutrik speakON* NL4 input connector is located on the rear panel wired in parallel with a 4-way barrier strip providing input and link through connections to additional TCS series cabinets. The TCS62 is finished in hard wearing semi matt black or optional white textured paint.
A weather resistant version is optionally available designed for outdoor use, with all components rated to IP54 and fitted with a captive cable tail secured through a sealed cable gland on an aluminium panel.
Feature.
- Arrayable 2 way full range loudspeaker for installation applications
- 175 Watts continuous, 700 Watts peak power
- Carbon fibre loaded 6.5" low frequency driver with low mass coil for improved transient response
- Aluminium dome 1" neodymium motor compression driver
- Rotatable converging elliptical waveguide provides 100° H x 60° V dispersion
- Multiple array configurations for extended coverage
- Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
- Multiple internal rigging points allow bracket mount and suspension in any orientation
- 12 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
- Architecturally styled powder coated perforated steel mesh grille
- Neutrik speakON* NL4 and barrier strip connectors
- 3-Year Warranty Program**
- Designed and engineered in England
Specs.
Dimensions (H x W x D) |
238 x 403 x 190 mm (9.4 x 15.9 x 7.5�) |
Net Weight |
7 kg (15.4 lbs) |
Components |
1 x 6.5” (165 mm) LF driver, 1 x 1” (25 mm) HF driver on a Converging Elliptical Waveguide |
Frequency Response |
70 Hz - 20 kHz ±3 dB, 50 Hz - 20 kHz ±10 dB |
Dispersion |
100° H x 60° V @ -6 dB points |
Sensitivity (1 W @ 1 M) |
88 dB |
Power Handling |
175 Watts continuous, 700 Watts peak |
Calculated Max SPL |
110 dB continuous, 116 dB peak |
Nominal Impedance |
8 Ohms |
Construction |
12 mm (1/2”) birch plywood. Finished in black semi matt textured paint |
Grille |
Powder coated perforated steel with foam backing |
Connectors |
Neutrik speakON* NL4, wired pin1+: positive, pin 1-: negative, pins 2+ and 2- N/C, 4-way barrier strip connector |
Protection |
|
Options |
White semi matt textured paint. IP54 weather resistance: stainless steel grille; black or white weather resistant paint finish; captive cable with cable gland |
Rigging |
8 x M8 internal rigging points with internal flying strips for eyebolts
4 x M8 internal rigging points for TURBOSOUND brackets
2 x M6 internal rigging points for OmniMount* brackets
|