| Model |
VNET 15DR |
| Part Number |
8001 5661 |
| Product Type |
Powered Subwoofer, Network Enabled |
| System Type |
Bass loudspeaker - Direct radiator |
| Frequency Response |
( /-3dB) 1 50Hz - 3.5kHz |
| Frequency Range |
(-10dB) 1 38Hz - 4.5kHz |
| Rated Maximum SPL 2 |
130dB (average), 136dB (peak) |
| Driver Complement |
380mm (15”) Bass driver |
| Crossover (DSP Generated) |
Variable low pass filter |
| Distortion |
Specifications |
| 10% Full Power (28.3V) |
2nd Harmonic, 3rd Harmonic |
| 40Hz |
2nd Harmonic : 1.42%, 3rd Harmonic : 1.83% |
| 100Hz |
2nd Harmonic :0.40%, 3rd Harmonic : 0.33% |
| 1% Full Power (8.94V) |
2nd Harmonic, 3rd Harmonic |
| 40Hz |
2nd Harmonic : 0.68%, 3rd Harmonic : 2.20% |
| 100Hz |
2nd Harmonic : 0.09%, 3rd Harmonic : 0.32% |
| Construction |
Specifications |
| Enclosure |
89.9 litres, 18mm (5/8”) birch plywood internally braced. |
| Finish |
Textured White Paint, Powder coated steel grille |
| Connectors |
1 x female XLR (input), 1 x male XLR (link), 1 x RJ45 (network in) |
| Connectors |
1x RJ45 (network link), 1 x Neutrik Powercon |
| Controls & Indicators |
LED on front of cabinet behind grill, Power LED (Blue), Signal LED (Green), Limit LED (Red) |
| Controls & Indicators |
User DSP - defeat switch, Power Switch |
| Fittings |
2 x Recessed carrying handles, 12 x M10 flying inserts, 4 x Rubber feet |
| Electronics |
Specifications |
| Efficiency |
>85% typically |
| Damping Factor |
120 ref 8W |
| Distortion |
<0.05% @ 1kHz -3dB output (22kHz bandwidth) |
| Input Impedance |
5.6kWunbalanced, 11.2kW balanced |
| Output Power (Programme) |
1200W |
| Input Sensitivity |
1.4V ( 5.5dBu) |
| System Type |
Dual channel Class D (Bridged) |
| DSP system |
Specifications |
| Comms Facilities |
Firmware updatable and selected parameters editable |
| Communications |
Serial - RS485 Proprietary message format |
| Dynamic Range |
112dB(A) typical |
| DSP |
3rd generation SHARC |
| Sampling Frequency |
96kHz 24 bit A/D-D/A word length |
| Format |
1 IN - 1 OUT |
| PSU |
Specifications |
| Input Connector |
Locking Neutrik Powercon |
| Voltage Selection |
Automatic (115 / 230V, 45 - 65Hz) |
| Type |
High current, high freq. switch-mode |
| Efficiency |
>90% typical |
| Input voltage |
100v / 115v / 230v nominal /-10% |
| Mains fuse |
External |
| Fuse type |
T10AT |
| Other features |
Automatic soft-start |
| Dimensions |
510mm(H) x 694mm(W) x 515mm(D) (20.08“(H) x 27.32 ”(W) x 20.28”(D)) |
| Net Weight |
72.7lbs (33kg) |
| Shipping Weight |
88.1lbs (40kg) |
